DODGE NSTU-SXV-100 Take Up Unit Bearings

Da:399.999 mm; S:4.763 mm; A1:222.25 mm; Max. speed for Taconite seal:315 r/min; Ca:117.805 mm; Stabilizing ring:SR-44-38; Taconite seal (dc shaft position):TER 170; R2:46.831 mm; P180°:285 kN; Eye bolt:2 x 3/8-16 UNC;

B:41.00 mm; Fillet Radius ra:2.50 mm; d:85.000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Basic Dynamic Radial Load Rating C:147000 N; Accessories:Without Accessories; D:180.0000 mm; Basic Static Radial Load Rating Co:146000 N; Grease Speed Rating Open/Shielded n1:3100 rpm;

D:190.0000 mm; Basic Static Radial Load Rating Co:180000 N; Oil Speed Rating n2:2800 rpm; Sealed Speed Rating n3:1800 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:1800 rpm; d:105.000 mm; B:65.10 mm; Basic Dynamic Radial Load Rating C:186000 N; Accessories:Two Shields;

α:20 °; C:300 mm; F:332 mm; D1 ≈:377.97 mm; r1,2 min.:6.4 mm; s:3 mm; B:300 mm; Calculation factor kr:0; Basic dynamic load rating C:4020 kN; Mass bearing:137 kg;

Ew:50 mm; Fatigue load limit Pu:7.1 kN; U:20 mm; Mass needle roller and cage assembly:0.053 kg; Basic dynamic load rating C:33.6 kN; Limiting speed:11000 r/min; Basic static load rating C0:57 kN; Reference speed:9500 r/min; Fw:42 mm;

d2 ≈:25.7 mm; Basic static load rating C0:12.7 kN; Calculation factor Y0:0.66; Basic dynamic load rating C:21.6 kN; Fatigue load limit Pu:0.54 kN; da min.:22.6 mm; B:22.2 mm; d:17 mm; da max.:25.5 mm; Mass bearing:0.18 kg;

R2:37.306 mm; dc:163.512 mm; A2:242.887 mm; Housing:SAF 234; Max. speed for PosiTrac Plus seal:760 r/min; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 19; Labyrinth ring (dc shaft position):LOR 148; S:4.763 mm; Da:309.999 mm;

D1 ≈:692 mm; B5:95 mm; D:790 mm; Ba min.:18 mm; Calculation factor Y1:2.3; Basic static load rating C0:12000 kN; Calculation factor Y2:3.4; r1,2 min.:7.5 mm; B2:75 mm; Da max.:758 mm;

C:50 mm; T:82 mm; Mass bearing:27.2 kg; da max.:181 mm; Dimension series:7GB; Basic dynamic load rating C:832 kN; Calculation factor Y0:0.4; Ca min.:9 mm; rb max.:4 mm; Db min.:300 mm;

r, r1,2 min.:1 mm; d:65 mm; Mass inner ring:0.26 kg; F:72 mm; B:45 mm;

C1 max.:31 mm; l3 min.:68 mm; d:50 mm; Mass rod end:4.1 kg; dk:66 mm; l4 max.:254 mm; Specific dynamic load factor K:100 N/mm²; B:35 mm; l5 ≈:30 mm; α:6 °;

Basic Static Radial Load Rating Co:26500 N; D:80.0000 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:7000 rpm; Oil Speed Rating Open/Shielded n2:8500 rpm; Basic Dynamic Radial Load Rating C:33600 N; Fillet Radius ra:1.00 mm; d:40.000 mm; B:18.00 mm;

Mass pillow block:18 kg; P120°:31.6 kN; da:73.025 mm; N1:22.225 mm; Housing:SAF 517; A1:88.9 mm; Labyrinth ring:2 x LOR 52; ba:35.719 mm; H2:31.75 mm; J max.:279.4 mm;

Basic Static Radial Load Rating Co:270000 N; Oil Speed Rating Open/Shielded n2:1900 rpm; D:360.0000 mm; Sealed Speed Rating n3:1000 rpm; B:46.00 mm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:1600 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:212000 N; d:260.000

R2:17.462 mm; P150°:12 kN; H1:69.85 mm; J max.:200.025 mm; R1:38.1 mm; Cap bolt:2 x 1/2-13 UNC; P60°:35.1 kN; H2:25.4 mm; Mass pillow block:9.13 kg; Max. speed for contact seal:4000 r/min;